GAP Australasian-Dentist-May June 2019

16 AustrAlAsiAn Dentist produCts new products from Ivoclar vivadent cont Dr Clark has developed a new specialised matrix system, the Black Triangle system. This system enables black triangle closure of up to 40% faster than the original Bioclear Anterior matrices. The Black Triangle matrices are custom designed for black triangle treatment and require no trimming prior to seating and are easier to place. The System utilises a unique probe, a colour coded gauge that simplifies choosing the matching, colour coded matrix as measured by the probe. It is simply a stroke of genius. The system comprises of four colour coded matrices in four different sized curvatures; Pink, Yellow, Green and Blue in new products from amalgadent both large incisor and small incisor sizes. The four colour coded curvature matrices allow you to treat the entire anterior sextant, canine to canine in both upper and lower arches with strong aesthetically pleasing results. In order to determine which coloured matrix curvature to use, the colour coded gauge instrument is inserted into the black triangle and the colour is indicated by looking down at the incisal edge. This colour coded gauge and matching matrices make choosing the correct curvature for gingival embrasure closure simple and predictable. The colour coded gauge instrument is fully autoclavable. The Black Triangle Kit Includes: u 40 x Small Incisor Matrices (10 of Pink, Yellow, Green and Blue) u 40 x Large Incisor Matrices (10 of Pink, Yellow, Green and Blue) u 1 x Black Triangle Gauge Instrument (Fully autoclavable) u Assorted set of 3 x True Contacts (Red, Orange and Blue) u 1 x Bottle of Two Tone Disclosing Solution Call Amalgadent on 1800 806 450 to place an order or for more information. strength (850 MPa*) and excellent fracture toughness (3.6 MPa · m1/2**). Just few working steps Full-contour crowns and three-unit bridges can be efficiently produced and allow for tooth-structure preserving preparations. The restorations can be seated conventionally, adhesively or self-adhesively (e.g. with SpeedCEM Plus). Polish, glaze or characterize IPS e.max ZirCAD MT Multi blocks are available in the sizes C17 and B45, in 7 A-D shades and 1 Bleach shade. After wet or dry processing, the restorations are sintered, using e.g. Programat CS4. Finally, they are polished using OptraFine and/or glazed using IPS e.max Crystall./Glaze Paste Fluo with fluorescent effect. In addition, the restorations can also be characterized using the Dentin or Intensive shades and stains from the IPS e.max CAD Crystall./ range. IPS e.max®, SpeedCEM®, Programat® and OptraFine® are registered trademarks of Ivoclar Vivadent AG. * Typical mean value of biaxial flexural strength: R&D Ivoclar Vivadent, Schaan, Liechtenstein ** Dentin, measurement of fracture toughness using the Vicker’s testing procedure: R&D Ivoclar Vivadent, Schaan, Liechtenstein (2017) Zirconium oxide: New block for CEREC users IPS e.max ZirCAD MT Multi features a natural progression of shade and translucency from dentin to incisal. IPS e.max ZirCAD MT Multi is a zirconium oxide material designed for the production of highly esthetic crowns and three-unit bridges. IPS e.max ZirCAD MT Multi is now also available in block form for CEREC and inLab systems. IPS e.max ZirCAD MT Multi’s gradual shade progression recreates the lifelike progression of natural dentition. It consists of three zones: 60% dentin, 20% transition and 20% incisal. Multiple raw material product combining two material groups Two different material groups are combined into one block: the medium translucent (MT) 4Y-TZP zirconium oxide and the highly translucent (HT) 5Y-TZP zirconium oxide. This imparts high levels of brightness to the dentin area and high levels of translucency to the incisal area, while providing high IPS e.max ZirCAD MT Multi is now available as block for CEREC and inLab. Bioclear Black Triangle Matrix Kit Step 1: Insert gauge instrument Step 2: Select and insert matching coloured matrices