GAP Australasian-Dentist-Mar Apr 2019

ALL-BOND UNIVERSAL ™ Light-Cured Dental Adhesive SEE WHY ALL-BOND UNIVERSAL IS AHEAD OF THE REST AS THE BEST UNIVERSAL ADHESIVE (1) COMPATIBLE:  Compatible with all light, self and dual cured resin composite and cement materials.  For all direct and indirect clinical procedures (2) VERSATILE:  Its unique chemistry allows total flexibility for Self-Etch, Total-Etch or Selective Etch Techniques.  Works well posteriorly (even in low light) unlike a universal adhesive recently released  Low film thickness (less than 10 microns) (3) DURABLE:  Offers high bond strengths to all Indirect substrates including: Metal, Porcelain, Zirconia, alumina, Fibre Posts and Lithium Disilicate  Contains MDP Monomer chemistry providing strong adhesion between tooth and metal substrates including Zirconia.  No water trees (holes in hybrid layer) due to Azeotropic solvent system = no residual water after evaporation (4) ONE BOTTLE:  pH of 3.5 after agitation (less acidic than leading competitors) therefore not requiring 2nd activator bottle  No sensitivity (it’s not too acidic, leaves smear layer intact) (5) SIMPLE TO USE 1. Dispense 1 – 2 drops in a mixing well 2. Apply 1st coat & agitate for 10-15 sec 3. Apply 2nd coat & agitate for 10 – 15 sec 4. Evaporate excess solvent by air drying for 10 sec 5. Light cure for 10 sec FOR ALL TECHNIQUES Selective-etch Total-etch Self-etch SEE HOW ALL BOND UNIVERSAL COMPARES WITH THE REST! Data compiled from respectivemanufacturer’s instructions for use.Trademarks are property of their respective owners. 6ML BOTTLE (NOT 5ML) Normally $165ea Special 6ml $145 ea, 3+ 6ml Only $135 ea 5+ 6ml Only $125 ea Bonus offer with 3+ 6ml receive 2 x Select HV Etch 35% 5gm worth $55 Free UNIVERSAL PRIMER™ Dual Cured Adhesive NEW SUBSTRATE UNIVERSAL PRIMER (S/C) Cut Enamel (SE/TE) 22.9 / 31.4 Dentin (SE/TE) 26.0 / 39.2 Lithium Disilicate (silane treated) 35.4 Zirconia 29.4 Stainless Steel 34.6 Titanium 27.3 Gold 20.8 Composite 40.2 Shear Bond Strength to Various Substrates (Duo-Link Universal ™ )* * Data on file, BISCO, Inc. Both Universal Primer & Duo-Link Universal were tested in self-cure mode using the Ultradent jig method.  Universal Primer is a dual-cured adhesive  No light curing required of adhesive layer under indirect restorations  Especially effective for bonding posts, where light may not reach deep in the canal  Developed with unique chemistry from All Bond Universal Adhesive  Universal Primer can be used with any etching technique Self Etch, Total-Etch or Selective Etching  Compatible with Light-cured, dual-cured and self- cured resin composites, cements and core materials  For direct and indirect bonding procedures: Direct Composite, Crowns, Bridges, Inlays / Onlays & Posts  Low film thickness of less than 5 microns  No Light curing necessary when used with dual-cured or self-cured restorative materials  Easy to use: (Steps for Indirect Restorations) 1. Dispense equal amounts of both Part A and Part B in a mixing well and mix for 5 sec 2. Apply 1st coat and agitate for 10-15sec 3. Apply 2nd coat and agitate for 10 – 15 sec 4. Evaporate excess solvent with air dry for 10 sec 5. Proceed with cementation steps PART A + B 6ML SET Normally $160 EA Special $120 EA + Bonus 2 x Select HV Etch 35% 5gm worth $55 1800 806 450 www.amalgadent.com.au